🔥🔥 Don’t Miss Out on Our End of Autumn Sale. If you have any questions, feel free to click the bottom right corner to contact our customer service..

Concat us[email protected]
Shopping Cart

No products in the cart.

🔍
BS EN 1808:2015 – TC:2020 Edition

BS EN 1808:2015 – TC:2020 Edition

$280.87

Tracked Changes. Safety requirements for suspended access equipment. Design calculations, stability criteria, construction. Examinations and tests

Published By Publication Date Number of Pages
BSI 2020 304
PDF Format Searchable Printable Preview Now
Guaranteed Safe Checkout
Categories: ,

If you have any questions, feel free to reach out to our online customer service team by clicking on the bottom right corner. We’re here to assist you 24/7.
Email:[email protected]

1.1 Application This European Standard specifies the requirements, test methods, marking and information to be provided by the manufacturer/supplier for Suspended Access Equipment (SAE). It is applicable to both permanent and temporary equipment which may be powered or hand operated and which are defined in Clause 3. The requirements of this standard include the rails, tracks and other support systems on which SAE depend for their integrity and safety as well as taking into account all associated loads and fixings to the building structure. This document is not applicable to Suspended Access Equipment which is manufactured before the date of its publication as EN. 1.2 Hazards This European Standard deals with significant hazards pertinent to SAE when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). This European Standard specifies appropriate technical measures to eliminate or reduce risks arising from the significant hazards. 1.3 Exclusions The following are not covered in this document: a) operation in severe and special conditions (e.g. extreme environmental conditions, corrosive environments, strong magnetic fields); b) operation subject to special rules (e.g. potentially explosive atmospheres, work on live overhead electrical lines); c) transportation of passengers from one level to another; d) handling of loads which could lead to a dangerous situation (e.g. molten metal, acids/bases, radioactive materials); e) working platforms suspended by cranes; f) silo access equipment; g) SAE using chains for the direct suspension of a platform; h) SAE using fibre ropes for the suspension of a platform; i) SAE intended to be used underground; j) SAE intended to be used in shafts; k) SAE directly powered by combustion engines.

PDF Catalog

PDF Pages PDF Title
175 1 Scope
1.1 Application
1.2 Hazards
1.3 Exclusions
176 2 Normative references
3 Terms and definitions, symbols and abbreviations
193 4 Hazards and preventative actions
197 5 Safety requirements and/or measures
6 Structural, stability and mechanical calculations for SAE
6.1 General
198 6.2 Safety margin allowed within the calculations
6.2.1 Calculating the stresses in structures
6.2.1.1 General
6.2.1.2 Allowable stresses
199 6.2.1.3 Checks against fatigue
6.2.2 Calculating the stress in mechanisms
6.2.2.1 General
6.2.2.2 Checks against fatigue and wear
200 6.3 Design loads and forces
6.3.1 General
6.3.2 TSAE Compatibility
6.3.3 De-rating the WLL of hoist(s)
201 6.3.4 Rated load on the platform
6.3.4.1 Platform for one person
6.3.4.2 Minimum load capacity
6.3.4.3 Calculation of RL
6.3.4.4 Single point suspended platform or chair
202 6.3.4.5 Two point suspended platform
6.3.4.6 Multi-point suspended platform and hinged continuous platform
204 6.3.5 Wind loads
205 6.3.6 Forces exerted by persons
6.4 Platform structural calculations
206 6.5 Calculations for suspension rigs
6.5.1 General
6.5.2 SAE incorporating auxiliary material hoist
6.5.3 Structural calculations for suspension rigs
6.5.3.1 Structural calculations for BMU suspension rigs
207 6.5.3.2 Structural calculations for TSP suspension rigs
208 6.5.4 Stability calculations for suspension rigs
6.5.4.1 Stability calculations for BMU suspension rigs
210 6.5.4.2 Stability calculations for TSP suspension rigs
211 6.5.5 Rail tracks and their support systems
6.5.6 Requirements for other suspension rigs
6.5.6.1 Strength of davit mechanical anchors
212 6.5.6.2 Calculation for parapet clamp
213 6.5.6.3 Monorails
6.5.6.4 Monorail support anchors
214 6.5.6.5 Stability calculation for counterweighted suspension beam
6.5.6.6 Secondary wire rope anchor on rigid structures
215 6.6 Loadings on the building
6.6.1 Safety factors
6.6.2 Recommended values for partial safety factor ( (f )
216 6.7 Calculation for steel wire rope
6.7.1 General
6.7.2 Calculation of the Force S in the suspension wire rope
6.7.2.1 Roof mounted hoist with double active rope suspension system
6.7.2.2 Platform mounted hoist
6.7.3 Rope terminations
6.8 Calculation for restraint systems
217 7 Suspended platforms
7.1 Requirements for the platform
218 7.2 Modular platforms
7.3 BMU platforms
7.4 Platform gates
7.5 Multi-deck platforms
219 7.6 Suspended chairs
7.7 Restraint systems
7.7.1 General
220 7.7.2 Mullion guide systems
7.7.3 Suspension wire rope restraint systems
226 7.7.4 Placing strict limitations on permitted wind speed
7.7.5 Other restraint systems
7.8 Wall rollers and buffers on the platform
7.9 Platforms working on an incline
227 8 Hoisting systems
8.1 General
8.1.1 Hoisting system
8.1.2 Pulleys
8.1.3 Mechanical transmission
8.1.4 Moving parts
8.1.5 Wire rope guides
8.1.6 Service brakes
228 8.2 Manually operated hoists
8.2.1 General
8.2.2 Crank operated hoists
8.2.3 Lever operated hoists
8.3 Power operated hoists
8.3.1 Prime mover
8.3.2 Electro-mechanical service brakes
229 8.3.3 Pneumatic and hydraulic mechanical service brakes
8.3.4 No-power descent
8.3.5 Overload detection devices
230 8.3.6 No load devices
8.3.7 End of rope switch for roof mounted hoists
8.3.8 Maintaining the longitudinal level of a platform (anti-tilt device)
8.3.8.1 General
8.3.8.2 Electrical anti-tilt device
8.3.8.3 Mechanical anti-tilt device
8.3.9 Obstacle detection
8.3.10 Lifting and lowering limit switches
231 8.4 Drum hoists
8.4.1 Safeguard against running off
8.4.2 Drum grooving
8.4.3 Hoist Drum
232 8.4.4 End of downward movement
8.5 Traction hoists
8.5.1 Traction force
8.5.2 Traction sheave grooving
8.6 Powered wire winders
8.6.1 Safeguard against running off
8.6.2 Roof mounted traction hoist
8.7 Twin capstan drum hoists
8.8 Jaw operated traction hoists
233 8.9 Secondary devices
8.9.1 General
8.9.2 Fall arrest devices
8.9.3 Secondary brakes
234 8.10 Rope pulleys
8.11 Wire ropes
8.11.1 General
8.11.2 Wire rope diameter
8.11.3 Wire rope terminations
235 8.11.4 Inspection facilities
8.12 Auxiliary materials hoists
236 9 Suspension rigs
9.1 General
9.2 Drive Systems
9.2.1 General
9.2.2 Travel limits of drive systems
9.2.3 Brakes and secondary devices
9.2.4 Manual drive
237 9.2.5 Powered drives
9.2.5.3 SAE powered by batteries
9.2.6 Telescopic jib systems
9.2.7 Chain drive systems
238 9.2.8 Screw jacking systems
9.2.8.1 Secondary devices
9.2.8.2 Inspection facilities for load bearing nuts
9.2.8.3 Travel limitation of the nuts
9.2.9 Rack and pinion drive systems
9.2.9.1 Secondary devices
9.2.9.2 Rack and pinion guides
9.2.9.3 Inspection facilities of pinions
9.2.10 Hydraulic drive systems
9.2.10.1 Cylinders
239 9.2.10.2 Hydraulic Drives
9.2.11 Pneumatic drive systems
9.2.11.1 Pneumatic drives
9.2.11.2 Pneumatic cylinders
9.3 Permanent suspension rigs
9.3.1 Trolley units
9.3.2 Clearance
240 9.3.3 Powered traversing
9.3.4 Jib(s)
9.3.5 Slewing
9.3.6 Counterweights
9.3.7 Covers and guards
9.3.8 Monorail tracks and traversing trolleys
241 9.3.9 Fixed and portable davits
9.3.9.1 If fixed or portable davits are used as the means of suspension of a platform the SAE shall conform to the following requirements:
9.3.9.2 Portable davits
Portable davits which are relocated in one or more working positions shall conform to the following specific requirements:
9.4 Temporary suspension rigs
9.4.1 General
9.4.2 Physical size and weight
9.4.3 Counterweighted suspension beams
9.4.4 Suspension points
242 10 Electrical, hydraulic and pneumatic systems
10.1 General
10.2 Measures to monitor 3 phase systems
243 10.3 Main power supply protection
10.4 Wire ropes with integrated electrical conductors
10.5 Spring loaded or motor powered cable reeler
10.6 Degrees of protection
11 Control systems
11.1 General
244 11.2 Emergency stop equipment
11.3 Control of jibs
11.4 Safety related parts of control systems for power operated equipment
246 11.5 Wireless control systems
247 12 Verification and certification
12.1 Type verification
12.1.1 General
12.1.2 Design checks
12.1.3 Type Tests
12.2 Manufacturing check
248 12.3 Installation checks for safety critical track supports and fixings
12.4 Verification of BMU systems on site
249 12.5 Verification after first assembly of TSAE on site
13 Marking of SAE
13.1 General
13.1.1 Signs and plates
13.1.2 All types of SAE
13.1.3 BMUs incorporating dedicated platforms
13.1.4 BMUs incorporating demountable platforms
13.1.5 TSPs
250 13.1.6 Platforms
13.2 Manual hoists
13.3 Powered hoists
13.4 Secondary devices
13.5 Suspension rigs for TSP
251 14 Accompanying documents
14.1 General
14.2 Manuals
14.2.1 General
252 14.2.2 Information relating to transport and handling of the SAE:
14.2.3 Information relating to the installation, commissioning and reassembly of the equipment:
14.2.4 Information relating to the SAE itself
253 14.2.5 Information relating to the use of the equipment:
254 14.2.6 Information for maintenance:
255 Annex A (normative) Platform type-tests
A.1 General
A.2 Maximum deflection type-test
256 A.3 Tests of cantilevered platform
A.3.1 Maximum deflection type-test
A.3.2 Stability type test
A.4 Static test of the platform
A.4.1 General
A.4.2 Horizontal deck
A.4.3 Sloped deck
257 A.5 Dynamic test of the platform
A.6 Ultimate load type-tests
258 A.7 Strength type-test of the decking
A.8 Strength type-test of the guardrail
A.8.1 Horizontal static test
A.8.2 Vertical static test
260 Annex B (normative) Hoist and secondary device type-tests
B.1 All types of hoists and secondary devices
B.1.1 Static test
B.1.2 Dynamic test
B.1.3 Strength type test
B.1.4 Testing the operation of fall arrest device
B.1.4.1 General
261 B.1.4.2 Force measurement apparatus
262 B.1.4.3 Test procedure
B.1.4.4 Test results
B.1.5 Secondary brake type test
B.1.5.1 General
263 B.1.5.2 Operating mode
B.1.5.3 Test results
264 B.1.6 Hoist lifting load limit tests
B.2 Manual operated hoists
B.2.1 In service operation test
B.2.2 Endurance type test
B.2.3 Wire rope type tests
B.3 Power operated hoists
B.3.1 Endurance type test for hoists
265 B.3.2 Overload detection device type tests
B.3.3 Electrical type tests
266 Annex C (normative) Suspension rig type-tests
C.1 Trolley unit
C.1.1 General
C.1.2 Static test
C.1.3 Dynamic test
267 C.1.4 Electrical type test
C.2 Other suspension rigs
268 Annex D (informative) Guidance on the presentation and interpretation of loads imposed by SAE structures
D.1 General
D.2 General notes for roof mounted suspension rigs
269 D.3 General notes for monorail support brackets and davits:
271 Annex E (informative) Maximum permitted horizontal displacement of platform
E.1 General
273 E.2 Sample calculation – 60 m without restraint:
275 Annex F (normative) Guidance on the requirements for wireless control systems
F.1 General
F.2 Control limitation
F.3 Stop
F.4 Serial data communication
276 F.5 Use of more than one operator control station
F.6 Battery-powered operator control stations
F.7 Receiver
F.8 Warnings
F.9 Information for use
277 Annex G (normative) Design requirements for rail tracks, monorail tracks and support systems
G.1 Scope
G.2 Characteristic loads and forces for rail tracks and rail track support systems
G.3 Basis for structural analysis
279 G.4 Materials
G.5 Ultimate limit states
G.5.1 General
G.5.2 Recommended values for partial safety factors (f)
280 G.5.3 Resistance of cross-sections of steel structures
281 G.5.4 Resistance of bisymmetrical members of steel structures
283 G.5.4.3 Local effects due to vertical wheel loads for BMUs supported on top of beams. The resistance of the beams shall be checked for the effects of the local stress induced by the BMU vertical wheel load. The web of the I or H-section shall be check…
288 G.5.5 Resistance of bottom flanges of I or H steel sections to wheel loads
G.5.5.1 Ultimate limit state
289 G.5.5.2 Serviceability limit state
291 G.6 Wheel/rail contact
G.6.1 General
292 G.6.2 Condition for load case 1
G.6.3 Condition for load case 2a, 2b and 3
293 G.7 Rail track support system
G.7.1 The rail track support system may be braced or unbraced in one or two directions or in a combination of both.
G.7.2 The bracing system shall be designed to resist the effect of the BMU’s horizontal wheel loads. In-service wind loads on the support system may be neglected.
G.7.3 Stanchions in fully braced support systems shall be designed to resist the effect of the BMU’s vertical actions only.
295 G.7.4 Stanchions in unbraced support systems shall be designed to resist the effect of the BMU’s vertical actions and transverse horizontal actions.
G.8 Serviceability limit states
G.8.1 For serviceability limit states (SLS) the partial factors for actions shall be taken as 1.0.
G.8.2 The recommended limits for vertical and horizontal deflections given in Table G.10 may be applied. Lower or higher values may be substituted if necessary for structural or operational reasons by agreement between the client, the designer and the…
296 G.9 Elastic critical moments and forces for plain rolled I and H sections
G.9.1 Elastic critical moment for lateral torsion buckling of members in bending
G.9.1.1 General
G.9.1.2 Uniform bending
297 G.9.1.3 Non-uniform bending
298 G.9.2 Elastic critical force for buckling of members in compression
299 G.10 References
300 Annex ZA (informative) Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC

Related products

BS EN 1808:2015 - TC
$280.87