BSI 20/30404299 DC 2020
$13.70
BS EN 17468-1. Fibre cement products. Determination of pull through and shear resistance and bending strength calculations – Part 1. Flat sheets
| Published By | Publication Date | Number of Pages |
| BSI | 2020 | 20 |
This document specifies a test method for pull through and shear resistance of fibre-cement flat sheets for roofing and cladding.
The results are also applicable for:
-
Coated or uncoated sheets manufactured at the same production facility as the tested sheets.
-
The test method can be applied to textured or non-textured fibre-cement flat sheets. The results of non-textured sheets are only applicable for textured sheets if the nominal minimum thickness of the textured sheet is at least the nominal thickness of the non-textured sheet.
-
The same type of fixing head or washer assembly where applicable if the diameter of the fixing head or washer is 0 mm to 2 mm larger than in the test.
-
The Shore A hardness of the sealing washer, where applicable, is ± 5 that of the washer used in the test.
-
The diameter of the drilled hole through the fibre cement sheet is 0 mm to 2 mm smaller than in the test, providing there is the required clearance hole around the shank of the fastener.
It applies only to products as delivered.
