BS EN 4041:2006
$86.31
Aerospace series. Bearings, airframe rolling. Rigid single row ball bearings in corrosion resisting steel, with extended inner ring and flanged alignment bush. Dimensions and loads
| Published By | Publication Date | Number of Pages |
| BSI | 2006 | 14 |
This standard specifies the characteristics of rigid single row ball bearings in corrosion resisting steel with an extended inner ring and a solid or lightweight flanged alignment bush, designed to withstand only slow rotations and slight oscillations under load. They are intended for use in airframe fixed and moving elements and in flight control linkages. The bearings defined in this standard shall be used in the temperature range from – 54 °C to 150 °C. However, as they are lubricated with the following greases (see EN 3727): ester type very high pressure grease (code letter A), operating range from – 73 °C to 121 °C or, synthetic hydrocarbons type very high pressure grease general purpose (code letter B) operating range from – 54 °C to 177 °C. Their field of application when lubricated with code letter A grease is limited to 121 °C.
Related products
-
BS EN 14041:2004:2006 Edition
Resilient, textile and laminate floor coverings. Essential characteristics Published By Publication Date Number of Pages…
-
BS EN 4011:2004
Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver…
-
BS EN 4049-002:2005 2006
Aerospace series. Thermocouple extension cable. Operating temperatures between -65°C and 260°C – General Published By…
-
BS EN 4057-404:2006 2007
Aerospace series. Cable ties for harnesses. Test methods – Low temperature installation Published By Publication…
-
BS EN ISO 4014:2001
Hexagon head bolts. Product grades A and B Published By Publication Date Number of Pages…
-
BS EN 4057-401:2006:2007 Edition
Aerospace series. Cable ties for harnesses. Test methods – Loop tensile strength Published By Publication…
-
BS EN ISO 4044:2008
Leather. Chemical tests. Preparation of chemical test samples Published By Publication Date Number of Pages…
-
BS EN 4049-001:2006:2007 Edition
Aerospace series. Thermocouple extension cable. Operating temperatures between -65°C and 260°C – Technical specification Published…
-
BS EN ISO 4042:2000
Fasteners. Electroplated coatings Published By Publication Date Number of Pages BSI 2000 34
-
BS EN 4048:2004
Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718),…
-
BS EN 4014:2004
Aerospace series. Inserts, thickwall, self-locking. Design standard Published By Publication Date Number of Pages BSI…
-
BS EN 4047:2003
Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718),…
-
BS EN ISO 4641:2016
Rubber hoses and hose assemblies for water suction and discharge. Specification Published By Publication Date…
-
BS EN 4641-102:2009
Aerospace series. Cables, optical 125 μm outside diameter cladding – Semi-loose 62,5/125 μm GI fibre…
-
BS EN 4641-001:2009
Aerospace series. Cables, optical, 125 ?m diameter cladding – Technical specification Published By Publication Date…
-
BS EN 4341:2001
Aerospace series. Aluminium alloy AL-W46431. Filler metal for welding. Wire and rod Published By Publication…
-
BS EN 4401:2006
Aerospace series. Lockbolts, protruding head, sheartype, close tolerance, in titanium alloy TI-P64001, with aluminium pigmented…
-
BS EN ISO 4043:2016:2017 Edition
Simultaneous interpreting. Mobile booths. Requirements Published By Publication Date Number of Pages BSI 2017 22
-
BS EN ISO 4048:2008
Leather. Chemical tests. Determination of matter soluble in dichloromethane and free fatty acid content Published…
-
BS EN 4045:2001
Aerospace series. Capillary tubes, seamless in heat resisting alloys. Diameter 0,6 mm ≤ D ≤…
-
BS EN 4049-004:2006 2007
Aerospace series. Thermocouple extension cable. Operating temperatures between -650DC and 260°C – Two core nickel…
-
BS EN 4021:2001
Aerospace series. Pipe coupling 8°30′ in titanium alloy. Elbows 90°, bulkhead Published By Publication Date…
-
BS EN ISO 4049:2009
Dentistry. Polymer-based restorative materials Published By Publication Date Number of Pages BSI 2009 38
-
BS EN 404:2005
Respiratory protective devices for self-rescue. Filter self-rescuer from carbon monoxide with mouthpiece assembly Published By…
-
BS EN 4047:2004
Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718),…
-
BS EN ISO 4049:2000
Dentistry. Polymer-based filling, restorative and luting materials Published By Publication Date Number of Pages BSI…
-
BS EN 4014:2003
Aerospace series. Inserts, thickwall, self-locking. Design standard Published By Publication Date Number of Pages BSI…
-
BS EN 4048:2003
Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718),…
-
BS EN 4031:2001
Aerospace series. Pipe coupling 8°30′ in titanium alloy. Nut for welded union Published By Publication…
-
BS EN ISO 8041:2005:2009 Edition
Human response to vibration. Measuring instrumentation Published By Publication Date Number of Pages BSI 2009…
-
BS EN 3745-404:2005 2006
Aerospace series. Fibres and cables, optical, aircraft use. Test methods – Thermal shock Published By…
-
BS EN 4051:2002
Aerospace series. Pipe couplings, 60°, spherical, in titanium alloy. Port connection Published By Publication Date…
-
BS EN 4071:2009
Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy,…
-
BS EN 4641-200:2018
Aerospace series. Cables, optical, 125 μm diameter cladding – Semi-loose structure 9/125 μm GI fibre…
-
BS EN ISO 4045:2008
Leather. Chemical tests. Determination of pH Published By Publication Date Number of Pages BSI 2008…
-
BS EN 4040:2006
Aerospace series. Bearings, spherical plain in corrosion resisting steel with self-lubricating liner with wide inner…
-
BS EN 4011:2003
Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy TI-P100HT (Inconel 718), silver…
-
BS EN 4001:2007
Aerospace series. Aluminium alloy AL-P2024-T351. Clad sheet and strip with improved chemical milling capability 1,6…
-
BS EN ISO 4641:2008:2009 Edition
Rubber hoses and hose assemblies for water suction and discharge. Specification Published By Publication Date…
-
BS EN 4049-003:2006 2007
Aerospace series. Thermocouple extension cable. Operating temperatures between -65°C and 260°C – Single core nickel…
